#
# Local PCMCIA Configuration File
#
#----------------------------------------------------------------------
#
# System resources available for PCMCIA cards
#
# NOTE: these settings have no effect on resources assigned to a
# CardBus bridge device itself; this file only affects resources
# assigned to cards.  Also, interrupt settings here will only affect
# ISA bus interrupts assigned to 16-bit cards.  PCI interrupts
# generally can't be reconfigured.
#
# With the kernel PCMCIA subsystem, these settings also have no effect
# at all on resources used for 32-bit CardBus cards.  Those are set by
# the PCI hotplug subsystem.
#

include port 0x100-0x4ff
include port 0x800-0x8ff
include port 0xc00-0xcff
include port 0x3000-0x7fff
include memory 0xe0100000-0xe17fffff
include memory 0xc0000-0xfffff
include memory 0xa0000000-0xa0ffffff
include memory 0x60000000-0x60ffffff

# High port numbers do not always work...
# include port 0x1000-0x17ff

# Extra port range for IBM Token Ring
include port 0xa00-0xaff

# Resources we should not use, even if they appear to be available

# First built-in serial port
exclude irq 4
# Second built-in serial port
#exclude irq 3
# First built-in parallel port
exclude irq 7

#----------------------------------------------------------------------